STANDARD MICROSYSTEMS CORPORATION

ETHERNET 3008

NIC Type      Ethernet
Transfer Rate 10Mbps
Data Bus      8-bit ISA
Topology      Linear Bus
Wiring Type   RG-58A/U 50ohm coaxial

              AUI transceiver via DB-15 port
Boot ROM      Available

[Image]

                             INTERRUPT REQUEST

     IRQ         JP1A        JP1B         JP1C        JP1D        JP1E

       2/9       Open        Open         Open        Open       Closed

  »     3       Closed       Open         Open        Open        Open

        4        Open       Closed        Open        Open        Open

        5        Open        Open        Closed       Open        Open

        7        Open        Open         Open       Closed       Open

                                CABLE TYPE

            Type                JP2         JP3      Pulse Transformer T1

  »      RG-58A/U 50ohm         Open        Open          Installed
            coaxial

       AUI transceiver via     Closed       Open        Not Installed
           DB-15 port

                             I/O BASE ADDRESS

  Address     SW1/1   SW1/2    SW1/3    SW1/4    SW1/5    SW1/6    SW1/7

      200h     On       On       On       On      Off      On        On

      220h     Off      On       On       On      Off      On        On

      240h     On      Off       On       On      Off      On        On

      260h     Off     Off       On       On      Off      On        On

      280h     On       On      Off       On      Off      On        On

      2A0h     Off      On      Off       On      Off      On        On

      2C0h     On      Off      Off       On      Off      On        On

      2E0h     Off     Off      Off       On      Off      On        On

  »   300h     On       On       On      Off      Off      On        On

      320h     Off      On       On      Off      Off      On        On

      340h     On      Off       On      Off      Off      On        On

      360h     Off     Off       On      Off      Off      On        On

      380h     On       On      Off      Off      Off      On        On

      3A0h     Off      On      Off      Off      Off      On        On

      3C0h     On      Off      Off      Off      Off      On        On

      3E0h     Off     Off      Off      Off      Off      On        On

                                 BOOT ROM

                 Setting                               SW1/8

  »                Disabled                             Off

                   Enabled                               On

                            BASE MEMORY ADDRESS

    Address      SW2/1     SW2/2     SW2/3     SW2/4    SW2/5     SW2/6

      C0000h       On        On       On        On       Off       Off

      C4000h      Off        On       On        On       Off       Off

      C8000h       On       Off       On        On       Off       Off

      CC000h      Off       Off       On        On       Off       Off

  »   D0000h       On        On       Off       On       Off       Off

      D4000h      Off        On       Off       On       Off       Off

      D8000h       On       Off       Off       On       Off       Off

      DC000h      Off       Off       Off       On       Off       Off

      E0000h       On        On       On        Off      Off       Off

      E4000h      Off        On       On        Off      Off       Off

      E8000h       On       Off       On        Off      Off       Off

      EC000h      Off       Off       On        Off      Off       Off

                         DIAGNOSTIC LED(S)

    LED        Color      Status               Condition

    LED1       Green        On         Data is being transmitted

    LED1       Green       Off       Data is not being transmitted

    LED2       Green        On          Data is being received

    LED2       Green       Off        Data is not being received